High Definition & Standard Definition
 Wide Viewing Angles
 16:9 & 4:3 Aspect Ratios
 Component, S-Video, & Composite Inputs
 Video Pass-Through for all Inputs
 Built-In Support for “L” Series Batteries 
 Anti-Glare Screen
 Auto Off Feature
 On-Screen Display Control
 Multi-System NTSC/PAL
 
 Quickstart Guide
 Product PDF Sheet
 Battery Times
 Monitor Comparisons
ikan V8000HD 8" TFT LCD Monitor
Deluxe Kit
$895

The ikan Hi-Def experience just keeps getting better. Introducing the new V8000HD ‘Deluxe Kit’. It has everything you need for Hi-Def monitoring in the field in a sturdy hard case!
 Diagonal 8" TFT - LCD
 Resolution: 800x480
 LCD Brightness: 400cd/m2
 Contrast Ratio: 200:1
 Viewing angles: 65/65(R/L)
 Operating Volts: DC 11-13V
 Power Consumption: <10W
 Operating Temp.: 0-65C
 Dimension: 8.1 ”x5.7”x1.2”
 Weight (lbs) 4.9
VIEWS:
 
Products > LCD Monitors > V8000HD Deluxe Kit
 


Q: What is the thread mounting size on the bottom of the V8000HD?

A: The V8000HD uses an industry standard Quarter-Twenty thread mount.


Q: Can the V8000HD flip the image?

A: The V8000HD does not flip the image ‘electronically’ however most videographers will use a high quality articulating arm
(for example arms from Zacuto at Zacuto.com) to mount an on-camera monitor and then do a simple ‘manual’ flip.


Q: Does the V8000HD have an underscan feature?

A: Even though the V8000HD does not have an underscan button LCD panels are in general considered already underscanned. The underscan function shrinks the image so one can see absolutely everything the camera is shooting. This is valuable on production sets for spotting things like boom mikes that might later be visible during post production. LCD panels (unlike CRTs) show most, if not all that the camera sees. The frame surrounding the panel can of course limit the view but this is not an issue with the V8000HD. What you see is basically what to get.

Q: Should I use the V8000HD integrated on-board trickle charger as my main battery charger for location production?

A: No, the V8000HD on-board trickle charger is for use as a back-up field trickle-charger only. All properly equipped field production packs should contain at least one stand-alone battery charger in addition to a back-up unit.


Q: I placed a "L" series battery on the monitor and I’m wondering about the “fit”. It goes on really hard and I can see that the monitor pins do not go all the way into the battery. Should I be concerned?

A: You should not be concerned. With the 970 battery you will notice that the pins don’t go all the way in. That is normal. After some use the battery should slide in easier.

Q: I tried using a Lenmar Sony compatible battery with the V8000HD and It doesn't power the monitor. Is my monitor defective?

A: No, The V8000HD has been confirmed to work with: Sony's official batteries and ikan's Sony compatible batteries. The Lenmar Sony compatible batteries are not compatible with the V8000HD.

 

 V7000 7 " LCD TFT Monitor >
 V9000 9 " LCD TFT Monitor >
 V9200 9.2 " LCD TFT Monitor >
Home ikan Community Forum About Us Products Support Press Buy
   

 

Home | About Us | Products | Support | Press | Buy | Dealer Login |  ©2007 ikan Corporation info@ikancorp.com • 1+713-272-8822
Dealer Login